Posts by Kinton Operations Team
Not Stuck But Still Failing? Understanding Thermal Drift in Thermostatic Valves
When an air compressor suffers from overheating, most operators immediately check the cooler, fan motor, or temperature sensor. But in ...
Why Is Your Rotary Screw Compressor Loading and Unloading Too Frequently?
In many industrial air systems, operators eventually notice a common problem: rotary screw compressors switch between loading and unloa...
Air Compressor Solenoid Valve Failure: How Coil Aging Causes Slow Loading
If a compressor starts to feel slow when loading, many operators begin by checking pressure settings, sensors, or even the inlet valve ...
Slow Inlet Valve Response in Air Compressors: 3 Mechanical Causes and Fixes
In industrial compressed air systems, issues such as slow inlet valve response, compressor delayed loading, and unstable pressure contr...
The Cost of Misalignment: How Coupling Errors Damage Airend Bearings
In rotary screw air compressors, the connection between the motor and the airend is often taken for granted. As long as power is transm...
Stopping Oil Leaks: Shaft Seal Failures in Rotary Screw Airends
Oil leakage around the drive end of a rotary screw airend is one of the most common issues encountered in compressor maintenance. When ...
Upgrading to Precision: Why Pressure Sensors Outperform Traditional Mechanical Switches
As industrial air systems move toward higher efficiency and smarter control, many operators are re-evaluating the limitations of tradit...
Sluggish Loading Response? Don’t Overlook Your Intake Control Air Cylinders
In many industrial air compressor systems, operators tend to focus on major components such as motors, airends, and control panels when...
The Forgotten Lifeline: A Guide to Annual Safety Valve Testing and Replacement
In most compressed air systems, safety components rarely attract attention—at least not until something goes wrong. Operators typically...
Eliminating Start-up Under Load: The Critical Sync Between Unloader and Blow-down Valves
One of the most common operational complaints in air compressor systems appears during restart. Operators may notice the machine strugg...